Select Page

Product Description

Straight Aluminum Tanker Trailer 40000L~45000L 3 Axle 6% Expansion
Heavy Duty 3 Axles 40000 42000 45000 50000 Liters Petrol Diesel Oil  Fuel Tank Truck Semi Trailer

 

Straight Tank Trailer Manufacturers
CONTACT US
 
Website:  tictrucks
 

Detailed Pictures

 

Trailer Model 3 Axles Aluminum Oil Tank Semi Trailer
Overall Dimension(Lx W x H)(mm) 13000*2500*3650
Tank Volume(L) 40000
Compartment 4
Manhole Cover Diameter is 500mm,Q235 material, 6 pieces
Axle Brand FUWA 13TON
Axle Number Three
Suspension system Mechanical suspension
Steel Spring 10 layers/set, with 13mm leaf thickness& 90mm leaf width
Tank Information The tanker body made of 6mm aluminum 5083, the front side head and back side head made of 7mm aluminum 5083
Tire Type 12R22.5
Tire quantity 12units
Traction Pin 50mm
Remarks With oil gas recovery system, loading system from down,with skid resistance board, with locks, with hand rail on the rear side and armrest on top both sides, with dip stick in the 6 compartments, loading and offloading pipe diameter is 4”(need to be on the left side), each compartment should be numbered with the fill capacity.
Spare Wheel Bracket 1 pieces
Tool Box 1 Unit
Landing Gear Two-speed, manual operation, heavy duty landing gear
Brake system none ABS. With parking brake switch
Brake air chamber Four double and 2 single chamber
Electrical system 1. Voltage: 24v 2. Receptacle: 7 ways (7 wire harness)
Tail lamp with turn signal, brake light & reflector, side lamp etc.
One set 6-core standard Cable.
Painting Original color
Packing Polish with wax before shipping
Delivery way Transfer to China port, and carry by ro-ro ship, the freight cost depends on the volume.

 

3 axle 38 CBM 5 compartment aluminum semitrailer

 

Description of 3 axle 38 CBM 5 compartment aluminum semitrailer

 

The tank body is made of 6mm high-quality aluminum 5454 or 5083. With double bulkheads to Prevent leakage. And a plurality of anti-wave baffles are arranged in the tank body. High pressure gas leak test is adopted to ensure that the tank body has high strength, stable center of gravity and safe and stable vehicle transportation.Tank valves and fittings are imported from USA or American .Dixon ,Betts,Allegheny.

 

Advantages of 3 axle 38 CBM 5 compartment aluminum semitrailer

 

High quality

Aluminum tank trailer get DOT 406 report and obtained the ISO9001 international quality management system certification. Achieved foreign trade qualification granted by Chinese government.

 

Beautiful appearance

The tank body is made of aluminium alloy 5083. After forming, it will be polished. The outside surface of the tank is like a mirror. It is very beautiful and does not need any paint.

  Aluminum Tank Trailer Aluminum Fuel Tanker Semi-trailer 3 axles, 36000L to 42000L

Tanker
Material                  Aluminium
Thickness of shell     7mm
Thickness of dish      7mm
Inside baffles            5mm
Compartments          5 to 7 compartments  
Volume                  40000L to 45000L+ 6% expansion  
Tank Top Accessories
Ladders fixed on the front and rear; foldable handrail
Walkway with anti-slip material in the front of reach the manholes,
Not covering the complete length of the tank.
Tank Equipments (all API Standard)
Each compartment is equipped with :
Aluminum Manhole cover 16″ or 20″      
Aluminum Emergency Bottom valve 3″ with Pneumatic switch in locker
Aluminum Spill Valve 3″ or 4″,  
Discharging Nylon hose 6m
Discharge and loading
Gravity discharge,
Top loading.            Option: Bottom loading
Running Gear
FUWA axle 13T*3                  Option: BPW axle 13T
Heavy duty spring suspension 18*16*9mm
12+1 pcs tires 315/80R22.5 Tire  (9.0*R22.5 steel rims)
3.5″ Jost kingpin                     Option: 2″
JOST 2-geared mechanical operated landing legs
Braking System
Double line air brakes Mechanical parking brake, CZPT brake valve
The first axle and the third axle with ABS System.
Electric Installation
Complete 24V system in explosion proof installation
Rear lighting with rear, stop, parking, direction, fog, reverse lights, side lights
Painting
Exterior surface treatment by shot blasting.
Painting by high solid primer directly on the surface
Painting inside special paint booth with the cargo cabin color or the color chosen by the customer
Accessories
Plastic Mudguards, Side protection, 2 Fire extinguisher, 1 Spare tire carrier.        
1 Tool box with standard tools,  Heavy duty tail bumper 

 

Certifications

Packaging & Shipping

 

Hot Wholesale Products:
Wholesale Semi Trailer Parts Wholesale Truck Semi Trailer Wholesale Heavy Semi Trailer Wholesale Tank Trailer Truck Wholesale New Semi Trailer Wholesale Semi Trailer  Aluminum Tanker Trailer Aluminum Alloy Trailer Aluminum Alloy Tanker Aluminum Alloy Tank Semi Trailer Aluminum Alloy Tank Truck Aluminum Alloy Oil Tanker
Recommended Suppliers
Alloy Bicycle Manufacturers Aluminum Truck Manufacturers Frame Alloy Manufacturers Tank Trailer Manufacturers Semi Trailer Manufacturers Aluminum Trolley Manufacturers Aluminum Tanker Trailer Manufacturers Aluminum Alloy Trailer Manufacturers Aluminum Alloy Tanker Manufacturers Aluminum Alloy Tank Semi Trailer Manufacturers Aluminum Alloy Tank Truck Manufacturers Aluminum Alloy Oil Tanker Manufacturers
Hot Wholesale Products
Wholesale Aluminum Alloy Wheels Wholesale Aluminum Alloy Truck Wholesale Aluminum Oil Tank Wholesale Alloy Trailer Wholesale Aluminum Tank Trailers

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
air-compressor

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that 1 of the 2 drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least 1 type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are 2 main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have 2 separate driveshafts. One goes to the front and the other goes to the back. If your car has 4 wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong 1 can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China Hot selling Straight Aluminum Tanker Trailer 40000L~45000L 3 Axle 6% Expansion   with Hot sellingChina Hot selling Straight Aluminum Tanker Trailer 40000L~45000L 3 Axle 6% Expansion   with Hot selling