Select Page

Product Description

30000liter Fuel Oil Liquid Tanker Semi Trailer 3-Axles

MAIN PERFORMANCE  

Product Specification
1 Type Tank Semitrailer
2 Product Name Fuel Tank Semitrailer
3 Volume 48000L
4 Tare Weight 9600kg
5 Payload 30t
6 Tank Body Tank Material Thickness:6mm
Sealing Head Thickness:6mm
Anti-Wave Board Corrugated shape
Thickness:4mm
Partition Plate Thickness:4mm
Manhole Aluminum manhole
Shape of Tank  Square
Compartments 5
Dimension 12800x2280x3800
7 Running System Axles 13t  Good quality axles
Suspension Tri-axle 10-pcs leaf spring suspension with equalizer beam
Tires  11.00R20,12unit
   
8 Braking System Dual lines pneumatic brake system,  KORMEE ABS braking system
9 Frame Main Beam Height 500, upper 8mm, 
lower 10mm. Mid web 6mm
10 King Pin Size: 50# (2”) or 90#(3.5”); Type: welded or assembled
11 Landing Gear  double side operation, 
Static capacity 28Ton
12 Electrical & Paint  Electrical Rear light, rear reflector, turn indicative light, side reflector, fog lamp, number plate light
Lights & Reflectors 24V, 7 lines
Painting zinc-rich primer and modified urethane topcoat as customers’ choices.
Accessories TOOL BOX (BOX ONLY)—PROVIDED WITH THE TRAILER
TWO SPARE WHEEL HOLDER(WINCH),BUT NO SPARE TYRES

I. Product Decription
***Material:We adopt the Chinese best quality ZheJiang Baogang steel Q345B-T700 as the vehicle chassis.The tank material, we have the carbon steel tank,stainless steel tank, aluminium alloy tank to choose.
***Axle: We usually use the famous brand 13t axle CZPT or CZPT axlewith the 16t brake pa  We can use the BPW axle as the customer’s requirement.
***Part:We choose the good quality spare parts in our trailer.To ensure the efficient utilization of the tank trailer for our customer.
***Subsea  safety valve: Every compartment of our tank semitrailer have the subsea safety valve.To ensure the safety of the tank semitrailer when it have accident.
***ABS braking system: This is our standard regulation to equip the KORMEE ABS braking system in our tank trailer..

II.Advance Process:
—Design Drawing: Before production, we will sent the design drawing to our customer to confirm the detail of the vehicle. We hope we can supply the most suitable product to our customer.
—Cutting and Welding: The I beam cutting adopt the Computer  Numerical Control Plasma Cutting Machine.The I beam welding adopt the Gantry Main Sill Welding Machine.
—Tank Body Welding: Using European arc butt welding, round head, mechanical folding, one-time forming technology.
—Surface Treatment: In order to remove the rust of the trailer body, we use the sand blasting to retreat the surface of the trailer.The trailer can have the beautiful appearance,the painting will be coating evenly, firm adhension, gloss more durable.
—Painting: One layer of the anti-rust painting, 2 layer of painting
—Test: We will test the quality of the trailer before delivery.

III. The Advantage Of Our 3 Axles Fuel Tank Semitrailer

1, Our tank is equipped with multi-channel anti-wave partitions, and can be divided into several compartments and load different liquid. And can be achieved the pump into, pump out through the table, and pump into, pump out not the table, self-flow through table, and not but table.
2. We test all of our fuel tank trailer.We use of high-pressure gas leak detection, the tank has a high strength, the center of gravity stability, vehicle safety and stability characteristics.
3. All kinds of alcohol, sulfuric acid, salted chemical tanker use imported stainless steel (thickness of 4mm-5mm) or plastic cans (polypropylene) (thickness of 12mm-22mm) manufacturing.
4. Our fuel tank is composed of a power take-off device, a drive shaft, a gear oil pump, a tank body and a pipe network system. Pipe network system consists of oil pump, three-way four-ball valve, two-way ball valve, filter, pipe composition.
5. Gear pump, centrifugal pump, heavy oil pump, stainless steel pump are available and can be installed heating pipe and insulation layer.

IV. The Detail of the Fuel Tank Trailer

V.  Classification Of The Fuel Tank Trailer

VI. Guarrantee For The Parts Of The Tanker Traielr:

ITEM NAME WARRANTY ITEM NAME WARRANTY
MAIN FRAME FRAME 1 YEAR RUNNING GEAR AXLE 6 MONTHS
SUSPENSION 6 MONTHS AXLE BEARING 3 MONTHS
KING PIN 1 YEAR WHEEL HUB 3 MONTHS
BALANCE ARM 3 MONTHS    
ITEM NAME WARRANTY ITEM NAME WARRANTY
BRAKING DEVICE BRAKE DRUM 3 MONTHS SUPPORT DEVICE LXIHU (WEST LAKE) DIS. GEAR 6 MONTHS
BRKE CHAMBER 3 MONTHS SPARE WHEEL  CARRIER 6 MONTHS
AIR RESERVOIR 6 MONTHS
ITEM NAME WARRANTY
OTHERS LEAF SPRING 3 MONTHS
BRAKE CHAMBER DIAPHRAGM 3 MONTHS
EMERGENCY RELAY VALVE 3 MONTHS
BRAKE SHOE 3 MONTHS
RELAY VALVE 3 MONTHS

VII. DEALING PROCESS

1. You send us an inquiries on your desired trailer through our contact information.
2. We shall reply you in 12 hours after we received our inquiry.
3. We will negotiate the detail of the trailer on your requirement.
4. Confirmed on the tech data.
5. Sign contract.
6.30% down payment or LC issuing.
7. Production
8. The Manufacturig process with updated news.
9. The Production completement.
10.Balance payment .
11.Arrange Shipment and Custom Clearance
12. A/S service for 1 year. 
 

Worm Shafts and Gearboxes

If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.
worm shaft

Concave shape

The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are 1 of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the 2 standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than 3 contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.
worm shaft

Thread pattern

A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.

Number of threads

Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with 2 ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the 2 tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in 1 revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in 1 step by using a set of worm gears. However, a multi-thread worm will have more than 2 threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.
worm shaft

Lubrication

The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.

China Hot selling 30000liter Fuel Oil Liquid Tanker Semi Trailer 3-Axles   near me supplier China Hot selling 30000liter Fuel Oil Liquid Tanker Semi Trailer 3-Axles   near me supplier