Select Page

Product Description

4 Axles 60000 Liters Fuel Tanker Semi Trailer,4 Axles Oil Tanker Trailer,Heavy Duty Fuel Tanker Trailer 4 Axles

Tri-Axles Fuel Tanker 42000Liters Air Ride 5 Comparments
4-Axles Fuel Tanker 60000Liters Air Ride 6 Comparments

GOOD PRICE CONTACT US

 
Website:  tictrucks
 

 

3 axle  oil tank trailer 45000L-56000L AGO fuel tank trailer for sale, factory sale 45cbm fuel/oil tank trailer 45000L aluminum alloy fuel/diesel tank semi trailer price

Loading medium available:

  1. Premium (PMS),

  2. Kerosene/Jet A1 (DPK),

  3. Diesel/Gasoil (AGO)

  4. Heavy Fuel Oil (LPFO) (HFO CZPT 180 & CST 380)

     

1, the tank shape: square round, oval, round.
2, tank material: carbon steel, stainless steel, steel lined, glass steel, plastic tank (polyethylene).
3, the tank is equipped with multi-channel anti-wave partitions, and can be divided into different compartments and load different oil. And can be achieved the pump into, pump out through the table, and pump into, pump out not the table, self-flow through table, and not but table.
4. The use of high-pressure gas leak detection, the tank has a high strength, the center of gravity stability, vehicle safety and stability characteristics.
5. All kinds of alcohol, sulfuric acid, hydrochloric acid, salted chemical tanker use imported stainless steel (thickness of 4mm-5mm) or plastic tanks (polypropylene) (thickness of 12mm-22mm  LLDPE) manufacturing.
6. The fuel tank is composed of a power take-off device, a drive shaft, a gear oil pump, a tank body and a pipe network system. Pipe network system consists of oil pump, three-way four-ball valve, two-way ball valve, filter, pipe composition.
7. Fuel dispenser and reel are optional.
8. Gear pump, centrifugal pump, heavy oil pump, stainless steel pump are available and can be installed heating pipe and insulation layer

 

 

Technical Parameter of fuel tank semi trailer

 

Technical Parameter of fuel tank semi trailer

Main Dimensions
Overall Length 12800mm  
Overall Width 2500mm  
Overall Height 3880mm  
Tare Weight 13500KGS  
Loading Capacity 45-60m3  
Photo only for reference, final product can be made according to exact requirements
Tank Body
Shape Mono block Cylinder
Total Volume(m3) 60 CBM
Tanker Body Material 5mm carbon steel
End plate 6mm carbon steel
Lifting Ladder Including Top walkway and backside steel material
Manhole cover 2 manhole covers, DN500mm 2 sets with 2 breather valves
Bottom Valve 1 sets of API Pneumatic Bottom Valve
Top Safety Rail 1 Set
Discharging valve 2 set DN100mm discharging valves
No. of Compartment 2
Discharging Pipe 4″rubber hose, 2 pc, 6m long
Chassis
Main Beams Special design I beam, connected by bolts and nuts with tanker body, removable from tanker body for separate transportation;
Axle 4 axles
FUWA 13 Ton
Landing Gear JOST brand Two-speed, manual operating, heavy duty landing gear
King Pin JOST brand 2″ bolt-in king pin
Suspension German design heavy duty mechanical suspension
Pneumatic Braking System WABCO RE 6 relay valve; T30/30
Website:  tictrucks     

    Hot Searches:
Truck Trailer Tank Trailer Cargo Trailer Aluminum Tanker Trailer BiHangZhou Tanker Semi Trailer Watering Tanker Semi Trailer Asphalt Tanker Semi Trailer Container Tanker Semi Trailer Fuel Tank Semi Trailer Truck
Recommended Suppliers:
Truck Trailer Manufacturers Tank Trailer Manufacturers Cargo Trailer Manufacturers Aluminum Tanker Trailer Manufacturers BiHangZhou Tanker Semi Trailer Manufacturers Watering Tanker Semi Trailer Manufacturers Asphalt Tanker Semi Trailer Manufacturers Container Tanker Semi Trailer Manufacturers Fuel Tank Semi Trailer Truck Manufacturers
Hot Wholesale Products:
Wholesale Semi Trailer Parts Wholesale Truck Semi Trailer Wholesale Heavy Semi Trailer Wholesale Tank Trailer Truck Wholesale New Semi Trailer Wholesale Semi Trailer  Aluminum Tanker Trailer Aluminum Alloy Trailer Aluminum Alloy Tanker Aluminum Alloy Tank Semi Trailer Aluminum Alloy Tank Truck Aluminum Alloy Oil Tanker
Recommended Suppliers
Alloy Bicycle Manufacturers Aluminum Truck Manufacturers Frame Alloy Manufacturers Tank Trailer Manufacturers Semi Trailer Manufacturers Aluminum Trolley Manufacturers Aluminum Tanker Trailer Manufacturers Aluminum Alloy Trailer Manufacturers Aluminum Alloy Tanker Manufacturers Aluminum Alloy Tank Semi Trailer Manufacturers Aluminum Alloy Tank Truck Manufacturers Aluminum Alloy Oil Tanker Manufacturers
Hot Wholesale Products
Wholesale Aluminum Alloy Wheels Wholesale Aluminum Alloy Truck Wholesale Aluminum Oil Tank Wholesale Alloy Trailer Wholesale Aluminum Tank Trailers

What Are Worm Gears and Worm Shafts?

If you’re looking for a fishing reel with a worm gear system, you’ve probably come across the term ‘worm gear’. But what are worm gears and worm shafts? And what are the advantages and disadvantages of worm gears? Let’s take a closer look! Read on to learn more about worm gears and shafts! Then you’ll be well on your way to purchasing a reel with a worm gear system.
worm shaft

worm gear reducers

Worm shaft reducers have a number of advantages over conventional gear reduction mechanisms. First, they’re highly efficient. While single stage worm reducers have a maximum reduction ratio of about 5 to 60, hypoid gears can typically go up to a maximum of 1 hundred and 20 times. A worm shaft reducer is only as efficient as the gearing it utilizes. This article will discuss some of the advantages of using a hypoid gear set, and how it can benefit your business.
To assemble a worm shaft reducer, first remove the flange from the motor. Then, remove the output bearing carrier and output gear assembly. Lastly, install the intermediate worm assembly through the bore opposite to the attachment housing. Once installed, you should carefully remove the bearing carrier and the gear assembly from the motor. Don’t forget to remove the oil seal from the housing and motor flange. During this process, you must use a small hammer to tap around the face of the plug near the outside diameter of the housing.
Worm gears are often used in reversing prevention systems. The backlash of a worm gear can increase with wear. However, a duplex worm gear was designed to address this problem. This type of gear requires a smaller backlash but is still highly precise. It uses different leads for the opposing tooth face, which continuously alters its tooth thickness. Worm gears can also be adjusted axially.

worm gears

There are a couple of different types of lubricants that are used in worm gears. The first, polyalkylene glycols, are used in cases where high temperature is not a concern. This type of lubricant does not contain any waxes, which makes it an excellent choice in low-temperature applications. However, these lubricants are not compatible with mineral oils or some types of paints and seals. Worm gears typically feature a steel worm and a brass wheel. The brass wheel is much easier to remodel than steel and is generally modeled as a sacrificial component.
The worm gear is most effective when it is used in small and compact applications. Worm gears can greatly increase torque or reduce speed, and they are often used where space is an issue. Worm gears are among the smoothest and quietest gear systems on the market, and their meshing effectiveness is excellent. However, the worm gear requires high-quality manufacturing to perform at its highest levels. If you’re considering a worm gear for a project, it’s important to make sure that you find a manufacturer with a long and high quality reputation.
The pitch diameters of both worm and pinion gears must match. The 2 worm cylinders in a worm wheel have the same pitch diameter. The worm wheel shaft has 2 pitch cylinders and 2 threads. They are similar in pitch diameter, but have different advancing angles. A self-locking worm gear, also known as a wormwheel, is usually self-locking. Moreover, self-locking worm gears are easy to install.

worm shafts

The deflection of worm shafts varies with toothing parameters. In addition to toothing length, worm gear size and pressure angle, worm gear size and number of helical threads are all influencing factors. These variations are modeled in the standard ISO/TS 14521 reference gear. This table shows the variations in each parameter. The ID indicates the worm shaft’s center distance. In addition, a new calculation method is presented for determining the equivalent bending diameter of the worm.
The deflection of worm shafts is investigated using a four-stage process. First, the finite element method is used to compute the deflection of a worm shaft. Then, the worm shaft is experimentally tested, comparing the results with the corresponding simulations. The final stage of the simulation is to consider the toothing geometry of 15 different worm gear toothings. The results of this step confirm the modeled results.
The lead on the right and left tooth surfaces of worms is the same. However, the lead can be varied along the worm shaft. This is called dual lead worm gear, and is used to eliminate play in the main worm gear of hobbing machines. The pitch diameters of worm modules are equal. The same principle applies to their pitch diameters. Generally, the lead angle increases as the number of threads decreases. Hence, the larger the lead angle, the less self-locking it becomes.
worm shaft

worm gears in fishing reels

Fishing reels usually include worm shafts as a part of the construction. Worm shafts in fishing reels allow for uniform worm winding. The worm shaft is attached to a bearing on the rear wall of the reel unit through a hole. The worm shaft’s front end is supported by a concave hole in the front of the reel unit. A conventional fishing reel may also have a worm shaft attached to the sidewall.
The gear support portion 29 supports the rear end of the pinion gear 12. It is a thick rib that protrudes from the lid portion 2 b. It is mounted on a bushing 14 b, which has a through hole through which the worm shaft 20 passes. This worm gear supports the worm. There are 2 types of worm gears available for fishing reels. The 2 types of worm gears may have different number of teeth or they may be the same.
Typical worm shafts are made of stainless steel. Stainless steel worm shafts are especially corrosion-resistant and durable. Worm shafts are used on spinning reels, spin-casting reels, and in many electrical tools. A worm shaft can be reversible, but it is not entirely reliable. There are numerous benefits of worm shafts in fishing reels. These fishing reels also feature a line winder or level winder.

worm gears in electrical tools

Worms have different tooth shapes that can help increase the load carrying capacity of a worm gear. Different tooth shapes can be used with circular or secondary curve cross sections. The pitch point of the cross section is the boundary for this type of mesh. The mesh can be either positive or negative depending on the desired torque. Worm teeth can also be inspected by measuring them over pins. In many cases, the lead thickness of a worm can be adjusted using a gear tooth caliper.
The worm shaft is fixed to the lower case section 8 via a rubber bush 13. The worm wheel 3 is attached to the joint shaft 12. The worm 2 is coaxially attached to the shaft end section 12a. This joint shaft connects to a swing arm and rotates the worm wheel 3.
The backlash of a worm gear may be increased if the worm is not mounted properly. To fix the problem, manufacturers have developed duplex worm gears, which are suitable for small backlash applications. Duplex worm gears utilize different leads on each tooth face for continuous change in tooth thickness. In this way, the center distance of the worm gear can be adjusted without changing the worm’s design.

worm gears in engines

Using worm shafts in engines has a few benefits. First of all, worm gears are quiet. The gear and worm face move in opposite directions so the energy transferred is linear. Worm gears are popular in applications where torque is important, such as elevators and lifts. Worm gears also have the advantage of being made from soft materials, making them easy to lubricate and to use in applications where noise is a concern.
Lubricants are necessary for worm gears. The viscosity of lubricants determines whether the worm is able to touch the gear or wheel. Common lubricants are ISO 680 and 460, but higher viscosity oil is not uncommon. It is essential to use the right lubricants for worm gears, since they cannot be lubricated indefinitely.
Worm gears are not recommended for engines due to their limited performance. The worm gear’s spiral motion causes a significant reduction in space, but this requires a high amount of lubrication. Worm gears are susceptible to breaking down because of the stress placed on them. Moreover, their limited speed can cause significant damage to the gearbox, so careful maintenance is essential. To make sure worm gears remain in top condition, you should inspect and clean them regularly.
worm shaft

Methods for manufacturing worm shafts

A novel approach to manufacturing worm shafts and gearboxes is provided by the methods of the present invention. Aspects of the technique involve manufacturing the worm shaft from a common worm shaft blank having a defined outer diameter and axial pitch. The worm shaft blank is then adapted to the desired gear ratio, resulting in a gearbox family with multiple gear ratios. The preferred method for manufacturing worm shafts and gearboxes is outlined below.
A worm shaft assembly process may involve establishing an axial pitch for a given frame size and reduction ratio. A single worm shaft blank typically has an outer diameter of 100 millimeters, which is the measurement of the worm gear set’s center distance. Upon completion of the assembly process, the worm shaft has the desired axial pitch. Methods for manufacturing worm shafts include the following:
For the design of the worm gear, a high degree of conformity is required. Worm gears are classified as a screw pair in the lower pairs. Worm gears have high relative sliding, which is advantageous when comparing them to other types of gears. Worm gears require good surface finish and rigid positioning. Worm gear lubrication usually comprises surface active additives such as silica or phosphor-bronze. Worm gear lubricants are often mixed. The lubricant film that forms on the gear teeth has little impact on wear and is generally a good lubricant.

China factory 4 Axles 60000 Liters Fuel Tanker Semi Trailer, 4 Axles Oil Tanker Trailer, Heavy Duty Fuel Tanker Trailer 4 Axles   with Best SalesChina factory 4 Axles 60000 Liters Fuel Tanker Semi Trailer, 4 Axles Oil Tanker Trailer, Heavy Duty Fuel Tanker Trailer 4 Axles   with Best Sales