Select Page

Product Description

5200 lb Torsion Suspension Trailer Axle With Electric Brakes Specifications

 Rated: 5200 lb
 Beam size: 80 x 80mm square tube
 Length: custom length
 Torsion arm: high quality forged steel 
 Mounting bracket: various sizes for choosing 
 Angle: 23 degrees down or as customer requirement
 Surface finish: black painted 

 Electric brake specification

Brake type: electric brake
Size: 12”
Bolt pattern: 6 bolts on 5.5”
Outer bearing: 15123
Inner bearing: 22580
Volt: 12V
Hand brake: option 
Surface finish: black painted 

About torsion axle

Torsion axles offer a low-maintenance, reliable, quiet, smooth ride. Mastervim torsion axles make it simple to have peace of mind while trailer towing.

Torsion axles have taken the trailer industry by storm in recent years. The boom in usage can be attributed to the many benefits that torsion axles offer over standard spring axles. Their innovative design provides an array of benefits and avoids many of the shortfalls that have commonly been found in traditional spring axles. 
 

Torsion Axle Benefits

No Maintenance

 
Smooth, Quiet Ride 

Reliable

Versatility

 

When is it better than a Spring Axle?

They are particularly advantageous over springs axles for applications like:

  • Marine/Boat trailers
  • Rough/bumpy surfaces
  • When much lower or higher ride height is needed
  • High vibration applications (like wood chippers or generators)
  • Custom applications
  • Applications with limited mounting space 
  • Corrosive environments (like saltwater)

Torsion Axles can improve your trailer-towing experience.

Application

Camper trailer, Fifth-wheel trailer, Off-road trailer, Toy hauler trailer, Double-decker trailer, Caravan towed trailer, Solar trailer, Horse trailer, Jeep trailer, Lowboy trailer, Mobile Home, Pup up trailer, Dolly trailer, Tow dolly, Car hauler, Construction trailer, Genset trailer, Generator trailer, Snowmobile trailer, Boat trailer, Aluminum trailer, Utility trailer, Light duty trailer, etc.

Other products

Rubber Torsion Axle without brake
Rubber Torsion Axle with Electric drum brake
Rubber Torsion Axle with Mechanical drum brake
Rubber Torsion Axle with Mechanical Disc brake
Rubber Torsion Axle with Hydraulic drum brake
Rubber Torsion Axle with Hydraulic Disc brak

 

Weight Capacity Beam Size Hub Bolt Pattern Brake Surface Finish
1500lbs 60 x 60mm 5 bolts on 4.5” Electric/hydraulic/without brake Painted or Galvanized
2200lbs 60 x 60mm 5 bolts on 4.5” Electric/hydraulic/without brake Painted or Galvanized
3500lbs 65 x 65mm 6 bolts on  5.5” Electric/hydraulic/without brake Painted or Galvanized
5200lbs 70 x 70mm 6 bolts on  5.5” Electric/hydraulic/without brake Painted or Galvanized
2200lbs 60 x 60mm 5 bolts on 4.5” Hydraulic drum brake Painted or Galvanized
3500lbs 65 x 65mm 6 bolts on 5.5” Hydraulic drum brake Painted or Galvanized
7000lbs 90 x 90mm 8 bolts on 6.5” Hydraulic drum brake Painted or Galvanized
2000lbs 60 x 60mm 5 bolts on 4.5” Mechanic disc brake Painted or Galvanized
3500lbs 65 x 65mm 5 bolts on 4.5” Mechanic disc brake Painted or Galvanized
5000lbs 70 x 70mm 6 bolts on  5.5” Mechanic disc brake Painted or Galvanized
2000lbs 60 x 60mm 5 bolts on 4.5” Mechanic drum brake Painted or Galvanized
3500lbs 65 x 65mm 5 bolts on 4.5” Mechanic drum brake Painted or Galvanized
5000lbs 80 x 80mm 6 bolts on 5.5” Mechanic drum brake Painted or Galvanized
2200lbs 60 x 60mm 5 bolts on 4.5” No Galvanized
3500lbs 65 x 65mm 5 bolts on 4.5” No Galvanized
5000lbs 70 x 70mm 6 bolts on  5.5 No Galvanized

Related Product

Capacity Range

450kg/750kg/1000kg/1250kg/1500kg/1750kg/2000kgs/2500kg/3000kgs/3500kg/4000kg
 1,650lb/1,750lb/2,500lb/3,500lb/5,200lb/6,000lb/7,000lb /8,000lb  

Product Process

Cutting axle tube>Welding brcket>Welding torsion arm with torsion bar>Surface treatment>Pressing rubber>Assemblying

Why choose Mastervim?

Mastervim was established in 2004, as a manufacturer of products for trailers. The product range has varied greatly during our evolution, currently, Mastervim is focusing on developing axles, suspensions, brake parts and other components for the trailer industry.
Our customers represent all types of trailer manufacturers including marine, RV, horse, commercial/industrial, cargo, etc.
Over the past several years, Mastervim has built 5 plants in China, designed several production lines of fully customed parts, involving casting, forging, machining, welding, painting and assembling.
Mastervim is grateful to our OEM customers and suppliers for their trust and support. Please bring your suggestions for improvement to us in our efforts to make a better company. We look forward to serving you in the future.
 

  1. Instant Response: 7 x 24 hours online, reply within 3 hours
  2. Quick Shipping: Big 3 broker partner -MSC COSCO shipping lines, familiar with America AU EU
  3. OEM Advantages: Unique R&D capability/3D printer Virtua modeling/20 years experience
  4. Quality Control: Word famous QC system/TUV SGS DOT/Quality guarantee

 

How to Choose the Right Worm Shaft

You might be curious to know how to choose the right Worm Shaft. In this article, you will learn about worm modules with the same pitch diameter, Double-thread worm gears, and Self-locking worm drive. Once you have chosen the proper Worm Shaft, you will find it easier to use the equipment in your home. There are many advantages to selecting the right Worm Shaft. Read on to learn more.
worm shaft

Concave shape

The concave shape of a worm’s shaft is an important characteristic for the design of a worm gearing. Worm gearings can be found in a wide range of shapes, and the basic profile parameters are available in professional and firm literature. These parameters are used in geometry calculations, and a selection of the right worm gearing for a particular application can be based on these requirements.
The thread profile of a worm is defined by the tangent to the axis of its main cylinder. The teeth are shaped in a straight line with a slightly concave shape along the sides. It resembles a helical gear, and the profile of the worm itself is straight. This type of gearing is often used when the number of teeth is greater than a certain limit.
The geometry of a worm gear depends on the type and manufacturer. In the earliest days, worms were made similar to simple screw threads, and could be chased on a lathe. During this time, the worm was often made with straight-sided tools to produce threads in the acme plane. Later, grinding techniques improved the thread finish and reduced distortions resulting from hardening.
When a worm gearing has multiple teeth, the pitch angle is a key parameter. A greater pitch angle increases efficiency. If you want to increase the pitch angle without increasing the number of teeth, you can replace a worm pair with a different number of thread starts. The helix angle must increase while the center distance remains constant. A higher pitch angle, however, is almost never used for power transmissions.
The minimum number of gear teeth depends on the angle of pressure at zero gearing correction. The diameter of the worm is d1, and is based on a known module value, mx or mn. Generally, larger values of m are assigned to larger modules. And a smaller number of teeth is called a low pitch angle. In case of a low pitch angle, spiral gearing is used. The pitch angle of the worm gear is smaller than 10 degrees.
worm shaft

Multiple-thread worms

Multi-thread worms can be divided into sets of one, two, or 4 threads. The ratio is determined by the number of threads on each set and the number of teeth on the apparatus. The most common worm thread counts are 1,2,4, and 6. To find out how many threads you have, count the start and end of each thread and divide by two. Using this method, you will get the correct thread count every time.
The tangent plane of a worm’s pitch profile changes as the worm moves lengthwise along the thread. The lead angle is greatest at the throat, and decreases on both sides. The curvature radius r” varies proportionally with the worm’s radius, or pitch angle at the considered point. Hence, the worm leads angle, r, is increased with decreased inclination and decreases with increasing inclination.
Multi-thread worms are characterized by a constant leverage between the gear surface and the worm threads. The ratio of worm-tooth surfaces to the worm’s length varies, which enables the wormgear to be adjusted in the same direction. To optimize the gear contact between the worm and gear, the tangent relationship between the 2 surfaces is optimal.
The efficiency of worm gear drives is largely dependent on the helix angle of the worm. Multiple thread worms can improve the efficiency of the worm gear drive by as much as 25 to 50% compared to single-thread worms. Worm gears are made of bronze, which reduces friction and heat on the worm’s teeth. A specialized machine can cut the worm gears for maximum efficiency.

Double-thread worm gears

In many different applications, worm gears are used to drive a worm wheel. These gears are unique in that the worm cannot be reversed by the power applied to the worm wheel. Because of their self-locking properties, they can be used to prevent reversing motion, although this is not a dependable function. Applications for worm gears include hoisting equipment, elevators, chain blocks, fishing reels, and automotive power steering. Because of their compact size, these gears are often used in applications with limited space.
Worm sets typically exhibit more wear than other types of gears, and this means that they require more limited contact patterns in new parts. Worm wheel teeth are concave, making it difficult to measure tooth thickness with pins, balls, and gear tooth calipers. To measure tooth thickness, however, you can measure backlash, a measurement of the spacing between teeth in a gear. Backlash can vary from 1 worm gear to another, so it is important to check the backlash at several points. If the backlash is different in 2 places, this indicates that the teeth may have different spacing.
Single-thread worm gears provide high speed reduction but lower efficiency. A multi-thread worm gear can provide high efficiency and high speed, but this comes with a trade-off in terms of horsepower. However, there are many other applications for worm gears. In addition to heavy-duty applications, they are often used in light-duty gearboxes for a variety of functions. When used in conjunction with double-thread worms, they allow for a substantial speed reduction in 1 step.
Stainless-steel worm gears can be used in damp environments. The worm gear is not susceptible to rust and is ideal for wet and damp environments. The worm wheel’s smooth surfaces make cleaning them easy. However, they do require lubricants. The most common lubricant for worm gears is mineral oil. This lubricant is designed to protect the worm drive.
worm shaft

Self-locking worm drive

A self-locking worm drive prevents the platform from moving backward when the motor stops. A dynamic self-locking worm drive is also possible but does not include a holding brake. This type of self-locking worm drive is not susceptible to vibrations, but may rattle if released. In addition, it may require an additional brake to keep the platform from moving. A positive brake may be necessary for safety.
A self-locking worm drive does not allow for the interchangeability of the driven and driving gears. This is unlike spur gear trains that allow both to interchange positions. In a self-locking worm drive, the driving gear is always engaged and the driven gear remains stationary. The drive mechanism locks automatically when the worm is operated in the wrong manner. Several sources of information on self-locking worm gears include the Machinery’s Handbook.
A self-locking worm drive is not difficult to build and has a great mechanical advantage. In fact, the output of a self-locking worm drive cannot be backdriven by the input shaft. DIYers can build a self-locking worm drive by modifying threaded rods and off-the-shelf gears. However, it is easier to make a ratchet and pawl mechanism, and is significantly less expensive. However, it is important to understand that you can only drive 1 worm at a time.
Another advantage of a self-locking worm drive is the fact that it is not possible to interchange the input and output shafts. This is a major benefit of using such a mechanism, as you can achieve high gear reduction without increasing the size of the gear box. If you’re thinking about buying a self-locking worm gear for a specific application, consider the following tips to make the right choice.
An enveloping worm gear set is best for applications requiring high accuracy and efficiency, and minimum backlash. Its teeth are shaped differently, and the worm’s threads are modified to increase surface contact. They are more expensive to manufacture than their single-start counterparts, but this type is best for applications where accuracy is crucial. The worm drive is also a great option for heavy trucks because of their large size and high-torque capacity.

China Best Sales 5200 Lb Torsion Suspension Trailer Axle with Electric Brakes   wholesaler China Best Sales 5200 Lb Torsion Suspension Trailer Axle with Electric Brakes   wholesaler